ADS803
2
SBAS074B
www.ti.com
+V
S
....................................................................................................... +6V
Analog Input ........................................................... (–0.3V) to (+V
S
+0.3V)
Logic Input ............................................................. (–0.3V) to (+V
S
+0.3V)
Case Temperature ......................................................................... +100°C
Junction Temperature .................................................................... +150°C
Storage Temperature ..................................................................... +150°C
ABSOLUTE MAXIMUM RATINGS
(1)
ELECTRICAL CHARACTERISTICS
At T
A
= full specified temperature range, V
S
= +5V, specified input range = 1.5V to 3.5V, single-ended input and sampling rate = 5MHz, unless otherwise specified.
ADS803E
PARAMETER CONDITIONS MIN TYP MAX UNITS
RESOLUTION 12 Tested Bits
SPECIFIED TEMPERATURE RANGE –40 +85 °C
CONVERSION CHARACTERISTICS
Sample Rate 10k 5M Samples/s
Data Latency 6 Clk Cycles
ANALOG INPUT
Single-Ended Input Range 1.5 3.5 V
Standard Optional Single-Ended Input Range 0 5 V
Common-Mode Voltage 2.5 V
Standard Optional Common-Mode Voltage 1V
Input Capacitance 20 pF
Track-Mode Input Bandwidth –3dBFS Input 270 MHz
DYNAMIC CHARACTERISTICS
Differential Linearity Error (Largest Code Error)
f = 500kHz ±0.25 ±0.75 LSB
No Missing Codes Tested
Spurious-Free Dynamic Range
(1)
f = 2.48MHz (–1dB input) 74 82 dBFS
(2)
2-Tone Intermodulation Distortion
(3)
74 dBc
f = 1.8M and 1.9M (–7dBFS each tone)
Signal-to-Noise Ratio (SNR)
f = 2.48MHz (–1dB input) 66.5 69 dB
Signal-to-(Noise + Distortion) (SINAD)
f = 2.48MHz (–1dB input) 65 68 dB
Effective Number of Bits at 2.48MHz
(4)
11 Bits
Input Referred Noise 0V to 5V Input 0.09 LSBs rms
1.5V to 3.5V Input 0.23 LSBs rms
Integral Nonlinearity Error
f = 500kHz ±1 ±2 LSB
Aperture Delay Time 1ns
Aperture Jitter 4 ps rms
Over-Voltage Recovery Time 1.5 • FS Input 2 ns
Full-Scale Step Acquisition Time 50 ns
SPECIFIED
PACKAGE TEMPERATURE PACKAGE ORDERING TRANSPORT
PRODUCT PACKAGE-LEAD DESIGNATOR
(1)
RANGE MARKING NUMBER MEDIA, QUANTITY
ADS803E SSOP-28 DB –40°C to +85°C ADS803E ADS803E Rails, 48
" """"ADS803E/1K Tape and Reel, 1000
NOTE: (1) For the most current specifications and package information, refer to our web site at www.ti.com.
PACKAGE/ORDERING INFORMATION
ELECTROSTATIC
DISCHARGE SENSITIVITY
This integrated circuit can be damaged by ESD. Texas Instru-
ments recommends that all integrated circuits be handled with
appropriate precautions. Failure to observe proper handling
and installation procedures can cause damage.
ESD damage can range from subtle performance degrada-
tion to complete device failure. Precision integrated circuits
may be more susceptible to damage because very small
parametric changes could cause the device not to meet its
published specifications.
NOTE: (1) Stresses above those listed under “Absolute Maximum Ratings”
may cause permanent damage to the device. Exposure to absolute maximum
conditions for extended periods may affect device reliability.
