CHERRY G80-8200HPBUS-2 (Full ISO doubleshot set)
- Reptile
- Location: USA
- Main keyboard: Realforce 87u 55gram
- Main mouse: Spawn
- Favorite switch: TOPRE
- DT Pro Member: -
Seeing if there would be any interest of these full sets; Brand new. Some of you know I recently ran a group buy for some G80-8113's that had a full ANSI set and my supplier contacted me and has quite a few NIB G80-8200HPBUS-2.
Price should be around $75-$85 each set. I believe this will have all the keys to fit any ISO board that has 1.25 mods; Only the spacebar would need to be modded. Please correct me if I am wrong
Price should be around $75-$85 each set. I believe this will have all the keys to fit any ISO board that has 1.25 mods; Only the spacebar would need to be modded. Please correct me if I am wrong
- Half-Saint
- Location: Slovenia, Europe
- Main keyboard: Raptor Gaming K1
- Main mouse: Logitech G5 Mk.2
- Favorite switch: Cherry MX Blue
- DT Pro Member: 0058
Is that 75-85 with or without shipping? In any case that's quite steep.
- kint
- Location: northern Germany
- Main keyboard: g80-8200/ FK-2002
- Main mouse: genius netscroll optical gen1
- Favorite switch: MX clear/ Alps white comp
- DT Pro Member: -
Cherry seemed to mess with these regularily, my german 8200 i.e. has that naughty non stepped capslock too.
Price is too steep for me, otherwise I'ld jump in for one instantly. Not saying that the price ain't right though.
If by any chance a controller/ PCB remains spare I'ld be highly interested in it, as mine throws out firmware revision/hardware issues.
Did pay 40€ shipped for my used one, with clears and lasered caps. But I wanted it real bad...
Price is too steep for me, otherwise I'ld jump in for one instantly. Not saying that the price ain't right though.
If by any chance a controller/ PCB remains spare I'ld be highly interested in it, as mine throws out firmware revision/hardware issues.
Did pay 40€ shipped for my used one, with clears and lasered caps. But I wanted it real bad...
- kint
- Location: northern Germany
- Main keyboard: g80-8200/ FK-2002
- Main mouse: genius netscroll optical gen1
- Favorite switch: MX clear/ Alps white comp
- DT Pro Member: -
afair from GH these usually come in brown or clear despite saying "P" in the label. Mine as said is a clear one, label stating LPEDE.
- Half-Saint
- Location: Slovenia, Europe
- Main keyboard: Raptor Gaming K1
- Main mouse: Logitech G5 Mk.2
- Favorite switch: Cherry MX Blue
- DT Pro Member: 0058
These relegendables are tempting but the nett price (shipping and import tax) would kill me.
- Reptile
- Location: USA
- Main keyboard: Realforce 87u 55gram
- Main mouse: Spawn
- Favorite switch: TOPRE
- DT Pro Member: -
I have already shipped everything from my previous group buys. Well besides 7bit because I just got his address again after GH dyingDjuzuh wrote:Reptile have you shipped the other one already?
If not is it possible to switch the order with this one?
Also yes I believe these will be brown switches; I can have him check.
- 7bit
- Location: Berlin, DE
- Main keyboard: Tipro / IBM 3270 emulator
- Main mouse: Logitech granite for SGI
- Favorite switch: MX Lock
- DT Pro Member: 0001
I want mine unchecked, sealed, NIB, untouched!Reptile wrote:I have already shipped everything from my previous group buys. Well besides 7bit because I just got his address again after GH dyingDjuzuh wrote:Reptile have you shipped the other one already?
If not is it possible to switch the order with this one?
Also yes I believe these will be brown switches; I can have him check.
- kint
- Location: northern Germany
- Main keyboard: g80-8200/ FK-2002
- Main mouse: genius netscroll optical gen1
- Favorite switch: MX clear/ Alps white comp
- DT Pro Member: -
actually those boards are pretty small given the included row on the right. They aren't any longer than normal 3k's.
But I'm with 7bit on this.
reptile, as a hint: If you sell those boards complete, check at least one board with the cherry tools software for issues with the firmware/programming.
Those are makro hardware programmable by pressing the 6 modifiers, however special functions like program start/shutdown or such will require cherry tools (free to download at their site). And current cherry tools versions seem to abandon older versions of controller hardware. [/endOT].
But I'm with 7bit on this.
reptile, as a hint: If you sell those boards complete, check at least one board with the cherry tools software for issues with the firmware/programming.
Those are makro hardware programmable by pressing the 6 modifiers, however special functions like program start/shutdown or such will require cherry tools (free to download at their site). And current cherry tools versions seem to abandon older versions of controller hardware. [/endOT].
- Reptile
- Location: USA
- Main keyboard: Realforce 87u 55gram
- Main mouse: Spawn
- Favorite switch: TOPRE
- DT Pro Member: -
kint wrote:actually those boards are pretty small given the included row on the right. They aren't any longer than normal 3k's.
But I'm with 7bit on this.
reptile, as a hint: If you sell those boards complete, check at least one board with the cherry tools software for issues with the firmware/programming.
Those are makro hardware programmable by pressing the 6 modifiers, however special functions like program start/shutdown or such will require cherry tools (free to download at their site). And current cherry tools versions seem to abandon older versions of controller hardware. [/endOT].
The G80-8113's we got before were made in the same year. I haven't even tried any of the Cherry tools software yet; I should probably do that
I just asked for a quote on 10 boards just to get a ballpark price. He has 40+ available; I doubt there will be any issue of him selling them all.
- 7bit
- Location: Berlin, DE
- Main keyboard: Tipro / IBM 3270 emulator
- Main mouse: Logitech granite for SGI
- Favorite switch: MX Lock
- DT Pro Member: 0001
If he has so many available, push the price down. Complain about that strange, never seen before, J-shape return (how are you supposed to type on this?)!!!
- 7bit
- Location: Berlin, DE
- Main keyboard: Tipro / IBM 3270 emulator
- Main mouse: Logitech granite for SGI
- Favorite switch: MX Lock
- DT Pro Member: 0001
Did you buy them from the same seller?tsangan wrote:that is a pretty high price without shipping around 60 shipped is right especially if you purchase a big amount.
I purchased 3 before around 65 shipped iirc
- Reptile
- Location: USA
- Main keyboard: Realforce 87u 55gram
- Main mouse: Spawn
- Favorite switch: TOPRE
- DT Pro Member: -
tsangan wrote:that is a pretty high price without shipping around 60 shipped is right especially if you purchase a big amount.
I purchased 3 before around 65 shipped iirc
thank you this helps in my argument of lower prices
- Reptile
- Location: USA
- Main keyboard: Realforce 87u 55gram
- Main mouse: Spawn
- Favorite switch: TOPRE
- DT Pro Member: -
Well tsangan got a pretty good deal
His lowest price would $78 per board. He said he has already sold over 50 units at $90 a piece
Anyways I doubt this will be going anywhere. What is G80-8200HPDUS-2?
He has 1 of those
His lowest price would $78 per board. He said he has already sold over 50 units at $90 a piece
Anyways I doubt this will be going anywhere. What is G80-8200HPDUS-2?
He has 1 of those
- kint
- Location: northern Germany
- Main keyboard: g80-8200/ FK-2002
- Main mouse: genius netscroll optical gen1
- Favorite switch: MX clear/ Alps white comp
- DT Pro Member: -
afair the third letter, here D indicates the connector/layout type - likely USB instead of PS2. this was a combo designation if i remember correctly.
-2 is black as well. H is double shot of course. US is US layout, well likely like the "US layout" above.
edit: The second letter is the switch, guys !
-2 is black as well. H is double shot of course. US is US layout, well likely like the "US layout" above.
edit: The second letter is the switch, guys !
- tsangan
- Main keyboard: HHKB Pro2
- Main mouse: DeathAdder
- Favorite switch: Topre
- DT Pro Member: -
50 units at $90/perReptile wrote:Well tsangan got a pretty good deal
His lowest price would $78 per board. He said he has already sold over 50 units at $90 a piece
Anyways I doubt this will be going anywhere. What is G80-8200HPDUS-2?
He has 1 of those
Seller got a mighty good deal