Help to read tms470r1vf288

[GsmHelp]

hello i whant to read whit j-link jtag tms470r1vf288 but something i do rong please someone guide me helpp:swtng::swtng::swtng:




i put here some phone what i put seting on j-link and from board


Here is settings from j-link


http://i.imgur.com/OXZEY0L.png


http://i.imgur.com/HJExc1G.png


http://i.imgur.com/66MAqY5.png


Here when i try to read


http://i.imgur.com/GKnA7dr.png




here is when i put 12v power for board and try to read


http://i.imgur.com/qIqWqAT.png


and pinout from boad


http://i.imgur.com/tToVkQI.png

[attilaa0]

You need to put 2x12V and 2xGND and turn on the radio.And why don't use project for TMS470VF288 included in Jlink Arm program?
You need just open project file ,then connect and read back entire chip.On pin 3,3V must connected VTref from J link interface.

[GsmHelp]

You need to put 2x12V and 2xGND and turn on the radio.And why don't use project for TMS470VF288 included in Jlink Arm program?
You need just open project file ,then connect and read back entire chip.On pin 3,3V must connected VTref from J link interface.

thans sir was worked your advice

[alexandr1966]

hI! Can you resend the pictures?